AGFA W Class, Operator'S Manual

Page: 55 / 132

W-Class 45
Communications (continued)
HOST SETTINGS
Settings which affect all communications
with a host.
HOST TIMEOUT 10
SEC (1-60)
The number of seconds a communications
port must be idle before the printer may
process data from a different port. This
value is also used to “timeout” an image /
label format download.
CONTROL CODES
♦
Allows the operator to change the prefix of
the software commands interpreted by the
printer.
STANDARD CODES
Hex 01 = SOH command; Hex 02 = STX
command; count-by = ^; Hex 1B = ESC;
Hex 0x0D = Carriage Return
ALTERNATE CODES
Hex 5E = SOH command; Hex 7E = STX
command; count-by = @; Hex 1B = ESC;
Hex 0x0D = Carriage Return
ALTERNATE CODES 2
Hex 5E = SOH command; Hex 7E = STX
command; count-by = @; Hex 1B = ESC;
Hex 0x7C = Carriage Return
ALTERNATE CODES 3
Hex 5E = SOH command; Hex 23 = STX
command; count-by = @; Hex 1B = ESC;
Hex 0x0D = Carriage Return
FEEDBACK CHARACTERS
Returns a Hex 1E, [RS], after each label
successfully prints, and a Hex 1F, [US],
after each batch of labels is printed.
ENABLED
Feedback characters are sent to the host.
DISABLED
No feedback characters are sent.
ESC SEQUENCES Allows data containing invalid ESC control
code sequences to be processed.
ENABLED
Normal printer operating mode.
DISABLED
ESC sequences are ignored and the data is
processed. Bitmapped font downloads are
disabled in this mode.