AGFA 6007/101 User Manual Download Page 23

Page: 23 / 119

System Control Unit

The System Control Unit is connected to the DR Detector via wireless network

or via the DR Detector cable.
The System Control Unit is connected to the X-ray generator to synchronize

the exposure, in a configuration with X-ray generator synchronization.
The System Control Unit is connected to the workstation via wired network.
Depending on the configuration, the System Control Unit may not be part of

the system.

Power switch

Status indicator

• Blinking green: starting up
• Green: ready
• Blue: communicating to the detector

Figure 7: System Control Unit (SCU) and Mini System Control Unit (Mini
SCU)

WARNING:

Do not use the System Control Unit within the patient’s vicinity.

Related Links

System Control Unit

on page 111

Mini System Control Unit

on page 112

Safety directions for the power supply

on page 69

DX-D 45C, DX-D 45G | Introduction to the DR Detector |

0292B EN 20190401 1627

Summary of Contents for 6007/101
























































































































Search results

Summary of Contents for 6007/101

Reviews:

Related manuals for 6007/101

Brands by name

Popular brands

AGFA 6007/101, User Manual

Search results

Summary of Contents for 6007/101

Reviews:

Related manuals for 6007/101

Brands by name

Popular brands