AGFA 6007/101 User Manual Download Page 86

Page: 86 / 119

Stopping the DR Detector

To stop the DR Detector:

Turn off the detector.
Press and hold the power button (approx. 3 seconds).
All the status indicator lights are off.

While holding down the battery pack, slide the lock levers toward

(unlock) (1), put your fingers on the battery edge that lifts up, and then

pull the edge to remove the battery pack (2).
a) Open the cover of the battery slot

b) Push the lock lever to the left to unlock the battery.
c) Slide the battery out of the battery slot.

d) Close the cover of the battery slot.

Note

When the detector will not be used for some time, remove

the battery. Otherwise, overdischarge may occur, leading to a

shorter battery life.

| DX-D 45C, DX-D 45G | Getting started

0292B EN 20190401 1627

Summary of Contents for 6007/101
























































































































Search results

Summary of Contents for 6007/101

Reviews:

Related manuals for 6007/101

Brands by name

Popular brands

AGFA 6007/101, User Manual

Search results

Summary of Contents for 6007/101

Reviews:

Related manuals for 6007/101

Brands by name

Popular brands