AGFA 5366/500 User Manual Download

Page: 122 / 148

Precautions on EMC

WARNING:

Use of this equipment adjacent to or stacked with other

equipment should be avoided because it could result in

improper operation. If such use is necessary, this equipment and

the other equipment should be observed to verify that they are

operating normally.

CAUTION:

Use of accessories, transducers and cables other than those

specified or provided by the manufacturer of this equipment

could result in increased electromagnetic emissions or

decreased electromagnetic immunity of this equipment and

result in improper operation.

CAUTION:

Portable RF communications equipment (including peripherals

such as antenna cables and external antennas) should be used

no closer than 30 cm (12 inches) to any part of the system,

including cables specified by the manufacturer. Otherwise,

degradation of the performance of this equipment could result.

IEC60601-1-2 ed. 4.0 §5.2.2.1 b) is not applicable.

122

| DRY 1.4, DRY 2.4 | Remarks for HF-emission and immunity

3631B EN 20210601 1655

Summary of Contents for 5366/500





















































































































































Search results

Summary of Contents for 5366/500

Reviews:

Related manuals for 5366/500

Brands by name

Popular brands

AGFA 5366/500, User Manual

Search results

Summary of Contents for 5366/500

Reviews:

Related manuals for 5366/500

Brands by name

Popular brands