AGFA 5366/500 User Manual Download

Page: 26 / 148

WARNING:

When operating or maintaining the printer, always observe the

following safety guidelines:

• Have electrical or mechanical defects repaired by skilled

personnel only!

• Do not modify this equipment without authorization of the

manufacturer.

• Do not override or disconnect the integrated safety features.
• Ventilation openings may not be covered.
• Position the printer in a way that it could be easily

unplugged in order to achieve separation from mains.

• Always switch off the printer and disconnect the power cord

from the outlet before carrying out any maintenance work.

CAUTION:

Strictly observe all warnings, cautions, notes and safety

markings within this document and on the product.

The classification of this product according to the medical electrical

equipment standard IEC 60601-1 requires installation outside the patient

vicinity. For definition of patient vicinity see dimensions below.

R = 1.5 m/4.9 feet (EN 60601-1) or 1.83 m/6 feet (UL 60601-1).

h = 2.5 m/8.2 feet (EN 60601-1) or 2.29 m/7.5 feet (UL 60601-1).

Topics:

•

Labels

•

Transport after installation

•

Environmental protection

•

Restriction of the Use of Certain Hazardous Substances (RoHS)

| DRY 1.4, DRY 2.4 | Introduction

3631B EN 20210601 1655

Summary of Contents for 5366/500





















































































































































Search results

Summary of Contents for 5366/500

Reviews:

Related manuals for 5366/500

Brands by name

Popular brands

AGFA 5366/500, User Manual

Search results

Summary of Contents for 5366/500

Reviews:

Related manuals for 5366/500

Brands by name

Popular brands