AGFA 5366/500, User Manual

Page: 118 / 148

d = 2.3 800 MHz
to 2.5 GHz
With P as the rated
power of the transmit-
ter in watts (W) in ac-
cordance with the
manufacturer infor-
mation on the trans-
mitter and d as the
recommended protec-
tive distance in me-
tres (m).
The field strength of
stationary radio
transmitters is lower
than the level of the
agreement
a
at all fre-
quencies in accord-
ance with an on-site
investigation
b
.
Disruptions are possi-
ble near devices that
carry the following
symbol:
• REMARK 1: The higher value will apply at 80 MHz and 800 MHz.
• REMARK 2: These Guidelines may not apply to all situations. The disper-
sion of electromagnetic waves is influenced by absorption and reflec-
tions from buildings, objects and people.
a. The field strength of stationary transmitters, such as base stations of radio
telephones, mobile broadcasts for rural areas, amateur stations, and AM and
FM radio transmitters, cannot be precisely predetermined theoretically. An
investigation of the location is recommended, to ascertain the electromagnetic
environment as a result of stationary high frequency transmitters. If the field
strength of the device exceeds the level of agreement given above, the device
must be observed with regard to its normal operation at each place of use. In
case of unusual performance characteristics, it can be necessary to take
additional measures, such as the re-orientation of the device, for example.
b. The field strength will be lower than 3 V/m above the frequency range from
150 kHz to 80 MHz.
118 | DRY 1.4, DRY 2.4 | Remarks for HF-emission and immunity
3631B EN 20210601 1655