AGFA 5366/500 User Manual Download

Page: 6 / 148

About the safety notices in this document

The following samples show how warnings, cautions, instructions and notes

appear in this document. The text explains their intended use.

DANGER:

A danger safety notice indicates a hazardous situation of direct,

immediate danger for a potential serious injury to a user,

engineer, patient or any other person.

WARNING:

A warning safety notice indicates a hazardous situation which

can lead to a potential serious injury to a user, engineer, patient

or any other person.

CAUTION:

A caution safety notice indicates a hazardous situation which

can lead to a potential minor injury to a user, engineer, patient

or any other person.

An instruction is a direction which, if it is not followed, can

cause damage to the equipment described in this manual or any

other equipment or goods and can cause environmental

pollution.

A prohibition is a direction which, if it is not followed, can cause

damage to the equipment described in this manual or any other

equipment or goods and can cause environmental pollution.

Note

Notes provide advice and highlight unusual points. A note is

not intended as an instruction.

| DRY 1.4, DRY 2.4 | About the safety notices in this document

3631B EN 20210601 1655

Summary of Contents for 5366/500





















































































































































Search results

Summary of Contents for 5366/500

Reviews:

Related manuals for 5366/500

Brands by name

Popular brands

AGFA 5366/500, User Manual

Search results

Summary of Contents for 5366/500

Reviews:

Related manuals for 5366/500

Brands by name

Popular brands