16
Baling Rate Settings
After pushing the SETUP MODE key in the Main Menu screen, the screen on the left will appear:
1. On the setup mode screen press the BALING RATE key.
2. Press the grey number value to the right of AVG Bale Weight (Lbs).
3. To adjust the weight of your bales, the scroll tool shown will display. Scroll through the values to select
correct information, press DONE when value has been selected. The information will be saved until
updated. Use the same procedure for adjusting bale length and time per bale.
4. Small square balers are equipped with Bale Rate Sensors which can be turned ON by sliding the bar to the
right as shown above. A green bar indicates that the bale rate sensors are on. While a grey bar means the
bale rate sensors are off.
Note: Bale rate sensors are used instead of a fixed time per bale to help determine a real time ton per hour
reading.
Stroke Counter Setup
Turn on Stroke Counter by selecting X,
Adjust min/max by selecting grey areas
Indicates Stroke Counter is ON
1. On the setup mode screen press the COUNTER SETUP key.
2. Turn on the stroke counter by select the X, which will change to an
, indicating the sensor is ON
3. Adjust the stroke maximum and minimum level by selecting the grey area on the right of screen
4. Scroll through the values to select correct setting, press DONE when value has been selected
4
1
2
3
1
2
3
5
Summary of Contents for HayBoss G2 644A
Page 2: ...2 intentionally blank ...
Page 46: ...46 Notes ...
