INSTALLING THE MODULE
CAUTION
Module NOT fastened to cabinet below. Remove before
tipping or transporting.
Place module on top of the cabinet with rear shoulder screws resting on the locator brackets behind the front slots. Slide
module toward the rear of the cabinet until the rear shoulder screws engage the slots in the rear of the brackets. Rest the
front shoulder screws into the front slots of the brackets.
IMPORTANT
Check to make sure wiring and ice maker tubing is clear and not interfering with module seal. Do NOT start product during
construction, as dust can block module condenser coils. If dust accumulates on coils, vacuum immediately, using a soft
brush attachment.
Do NOT operate the refrigerator in the presence of explosive fumes.
Do NOT install the refrigerator where the temperature will drop below 60 degrees F (15 degrees C) or rise above 110 de
-
grees F (43 degrees C). The compressor will NOT be able to maintain proper temperatures.
Make electrical connections from the top
of the lower cabinet to the junction box at
left side of module. If NO ice maker then
only one cabinet line will be protruding.
With ice maker, be sure to plug the ice
maker line into the module, and the sole
-
noid valve as well. See module diagram on
the right.
Front
Shoulder
Screw
Rear Shoulder Screw
7
Module
Water Valve
Power Cord
Cabinet
Leads
Junction
Box
Ice Maker
Leads