75
ADJUSTING THE LCD DISPLAY
It e m
Fu n c t i o n
Op e r a t i o n
Ra n g e
OSD turn off
Set the period of time the OSD menu
stays on the screen.
Press the
/
button on the
control panel or the /
button
on the remote control to adjust the
value.
Off
5 to 120
OSD H position
Set the OSD menu horiz ontal
position on the screen.
50
OSD V position
Set the OSD menu vertical position
on the screen.
50
Information
OSD
Set the period of time the
information OSD displayed on the
upper left corner of the screen. The
information OSD will appear on
the screen when the input signal is
changed. The information OSD will
remain on the screen if the setting
is set to
OFF
.
Off
1 to 60
Logo
Choose to enable or disable the
picture of Logo when turn on your
LCD display.
No t e :
• If Logo is set to
On
then the
OTS logo will show.
• If Log is set to
Of f
then the
scalar OTS logo will not show.
• If Logo is set to
Us e r
then there
will be no boot logo when power
on.
• Logo will not rotate with rotation
setting/detection.
1
Press the
/
button on the
control panel or the / button on
the remote control to select the
setting.
2
Press the button on the
control panel or the
button
on the remote control to set the
value.
Off
On
User
Monitor ID
Adjust the ID number for controlling
the display via the RS232
connection. Each display must
have a unique ID number when
multiple sets of this display are
connected.
1
Press the
/
button on the
control panel or the / button on
the remote control to select the
setting.
2
Press the button on the
control panel or the
button
on the remote control to set the
value.
3 Press the
/
button on the
control panel or the / button
on the remote control to adjust
the value.
Monitor ID
Monitor Group
Heat status
View the thermal status of the LCD display.
