77
ADJUSTING THE LCD DISPLAY
It e m
Fu n c t i o n
Op e r a t i o n
Ra n g e
IR control
Select the operation mode of
the remote control when multiple
displays are connected via an
RS232 connection.
• Normal: All displays can be
operated normally by the remote
control unit.
• Primary: Designate this display
as the primary display for
remote control operation. Only
this display can be operated by
the remote control. (In primary
mode, IR key will always be
processed regardless the
monitor id/group settings).
• Secondary: Designate this
display as the secondary
display. This display can not be
operated by the remote control,
and will only receive the control
signal from the primary display
via the RS232 connection.
• Lock All / Lock all but Volume
/ Lock all but Power / Lock
all except PWR & VOL: Lock
the remote control function of
this display. To unlock, press
and hold the
button on
the remote control for 6 (six)
seconds.
1
Press the
/
button on the
control panel or the / button on
the remote control to select the
setting.
2
Press the button on the
control panel or the
button
on the remote control to set the
value.
Unlock
Lock All
Lock All but
Volume
Lock All but
Power
Lock All
except PWR &
VOL
Primary
Secondary
Power LED light
Set the display LED indicator on or
off.
1
Press the
/
button on the
control panel or the / button on
the remote control to select the
setting.
2
Press the button on the
control panel or the
button
on the remote control to set the
value.
On
Off
