86
ADJUSTING THE LCD DISPLAY
It e m
Fu n c t i o n
Op e r a t i o n
Ra n g e
Power Save
Mode 1
If the LCD display
cannot detect any input
source signal, the " No
Signal" message will
appear on the screen,
and the display will
automatically turn off
after 60 seconds. At this
time, even if an input
source is connected, the
screen will unable to be
awakened.
1
Press the
/
button on the
control panel or the / button on
the remote control to select the
setting.
2
Press the button on the
control panel or the
button
on the remote control to set the
value.
Mode 1
Mode 2
Mode 3
Mode 4
Mode 2
Not supported
Mode 3
If the LCD display
cannot detect any input
source signal, the “No
Signal” message will
appear on the screen,
and the display will
automatically enter
standby mode after 60
seconds. At this time,
if an input source is
connected, the screen
can be awakened.
Mode 4
If the LCD display
cannot detect any input
source signal, the “No
Signal” message will
appear on the screen,
and the display will not
automatically turn off or
enter standby mode.
OPS settings
Set the OPS settings.
Auto
Always off
Always on
Advanced
option reset
Reset all settings except Date and
Time in the Advanced option menu
to factory preset values.
1
Press the
/
button on the
control panel or the / button
on the remote control to select
the setting.
2
Press the button on the
control panel or the
button
on the remote control to set the
value.
CANCEL
RESET
