DirectCommand
Installation
Raven Accu-Flow ISO Kit
Ag Leader Technology
PN: 2006375 Rev. B
February 2015
Page 11 of 15
4. Connect the Local CAN Terminating Plug, PN: 4002870 to the
mating receptacle of the ISOBUS Breakout Cable.
5. Connect the 6-pin Deutsch plug of the ISOBUS Breakout Cable
to the mating receptacle of the Local CAN Breakout Cable.
Liquid Swath Control Module with Local CAN Cabling
6. Connect the gray 12-pin plug on the 12 Boom Section Cable PN:
4003949-6 to the gray 12-pin receptacle of the Liquid Swath
Control Module PN: 4002862.
7. Connect the gray 2-pin receptacle on the 12 Boom Section Cable
to one of the gray 2-pin plugs of the ISOBUS Implement Cable.
8. Connect the gray 2-pin plug of the 12 Boom Section Cable to the
mating receptacle on the Liquid Swath Control Module.
9. Connect the 3-pin Weatherpack plugs of the 12 Boom Section
Cable to the respective section valves on the implement.
10. Route all cables to avoid any sharp edges and pinch points.
Bundle up all excess cable and tie with zip-ties.
Local CAN
Breakout Cable
Local CAN
Terminating Rec.
Local CAN
Terminating Plug
ISOBUS
Breakout Cable
