– English –
Mounting and commissioning
DIT 10
39
Tank height
The arrow at the bottom of the display points to the unit "Per-
cent". The display shows the tank height adjusted. The val-
ue 0000 means that no tank height has yet been entered.
1.
Use the keys
to enter the determined tank height in mm.
Press the key
to select the digit to be changed. Then press
the key
to change the value of the selected digit.
2.
Press the key F, to confirm the setting. After that, you can enter
the liquid level.
Current liquid level
The arrow at the bottom of the display points to the unit "Level"
(FH). The display shows level measured by the probe in mm.
The value shown on the display is based on the tank data you have
already entered and on the measurement. Check whether the dis-
played value corresponds to the value you have determined in chap-
ter 6.1 to a degree of accuracy that is sufficient for your purposes. If
you want to obtain a higher accuracy, you can overwrite the dis-
played liquid level by the actual liquid level determined by you.
The higher the filling level, the higher the accuracy. The highest ac-
curacy is achieved if the tank is completely full when you enter the
tank data. If the actual liquid level is less than 50 %, it is not mean-
ingful to correct the displayed value. In such a case, you can re-enter
the tank data when the tank is completely full, see chapter 7.3.
1.
Use the keys
and
to enter the determined liquid level in
mm. Press the key
to select the digit to be changed. Then
press the key
to change the value of the selected digit.
Y
o
u have now entered all the tank data and the display unit
switches to normal measurement mode.
The symbol
in the upper left corner of the display is no
longer shown.
2.
Up to a value of 9999 litres, the value is entered in litres without
a decimal place. In the case of volumes > 9999 litres, the value
is entered in cubic metres (1000 litres = 1 cubic metre) with a
decimal place. The decimal place is moved with the key
.
3.
Press the key F, to confirm the setting. After that, you can enter
the tank height.
2.
Press the key F, to confirm the setting.
