26
b) Pulse mode
c) Logic mode
Fig. 11. Configuration parameters for different universal output modes
Configuration parameters of the logic output operation are contained
in the additional tab
Logic output
, which has the same appearance as
shown in Fig.11.c.
4.1.4. The information contained in the
USS Settings
tab is displayed only in
the SERVICE and ADJUSTMENT operating modes and is only available
for editing in the ADJUSTMENT mode. In WORK mode, the tab is not
available for viewing.
4.1.5. You can view the current values of the measured parameters on the
Flow
Data
tab (Fig.12) after pressing the
Start reading
button.
