25
You can adjust the device time, set up communication parameters
via the interface, reset archives and volumes, and set the mode of tran-
sition to "winter"/"summer" time on the
System
tab.
4.1.3. You can set the USS processing parameters, set the LCD contrast value
and operating time and select the measured flow rate dimension on the
Service
tab (Fig.10).
Fig.10. View of the Service tab
To change the current value of the parameter, type a numeric value
in the corresponding field or set a symbolic value from the drop-down list
and press the
button.
You can also set the parameters of the universal and logic outputs in
the
Service
tab.
To switch to the setting parameters of universal output operation, set
the checkbox
in the additional tab
Universal output
in the line con-
taining the name of the output operation mode (Fig.11).
a) Frequency mode
