Page 17
Refer to Figure N for Steps 27-29 (For Both Bronco and Ranger)
Step 27: Locate the battery on the passenger side of the vehicle.
Step 28: Connect the black ground terminal cable of the aFe POWER module harness to the negative
battery terminal.
Step 29: Connect the red power terminal cable of the aFe POWER module harness to the positive battery
terminal.
If the vehicle needs to be jump-started, the module will have to be disconnected from the
harness, and the bypass plug installed in place of the module. This is to protect the Scorcher
Blue module from any damage that may occur when jump-starting.
INSTALL
Figure N
Power and Ground Cables Connection