Page 28
Refer to Figure Y (Bypass Plug)
A bypass plug is included in the kit. The plug can be connected to the harness instead of the
module. This bypass plug will need to be used when the vehicle needs to be jump-started, or
when there is an issue with the drivability of the vehicle. Once the bypass plug is connected,
the vehicle will run in factory settings. Make sure the plug is fully engaged when connected
to the harness. Thank you for choosing aFe POWER!
The vehicle needs to be in sleep mode when the module gets disconnected and the bypass
plug connected. Wait for the blue LED on the module to stop flashing to make sure the
vehicle is in sleep mode.
Figure Y