Afag SE20, Assembly And Operating Instructions Manual

Page: 48 / 56

Maintenance and repair
48 – 56 Assembly instructions EN

SE20 - SE30

Date 06.09.2021

Version 2.0
9.4.3 Motor cable
Designation Article no.
Motor cable 4m EDM2x/ES20/SE20/PEL20 carrier - 080.685
Motor cable 4m EDM2x/ES20/SE20/PEL20 carrier Type KS05-Y/R-4 080.685
Motor cable 4m EDM2x/ES20/SE20/PEL20 carrier TypeKS05-D/R-4 080.218
Motor cable 4m EDM2x/ES20/SE20/PEL20 carrier Type KS05-W/R-4 080.259
Motor cable 4m EDM2x/ES20/SE20 Type K05-Y/R-4 080.681
Motor cable 4m EDM2x/ES20/SE20 Type K05-D/R-4 080.235
Motor cable 4m EDM2x/ES20/SE20 Type K05-W/R-4 080.245
Motor cable 6m EDM2x/ES20/SE20/PEL20 carrier Type KS05-D/R-6 080.247
Motor cable 6m EDM2x/ES20/SE20/PEL20 carrier Type KS05-W/R-6 080.297
Motor cable 6m EDM2x/ES20/SE20/PEL20 carrier Type KS05-Y/R-6 080.686
Motor cable 6m EDM2x/ES20/SE20 Type K05-Y/R-6 080.682
Motor cable 6m EDM2x/ES20/SE20 Type K05-W/R-6 080.303
Motor cable 6m EDM2x/ES20/SE20 Type K05-D/R-6 080.248
Motor cable 8m EDM2x/ES20/SE20/PEL20 carrier Type KS05-D/R-8 080.219
Motor cable 8m EDM2x/ES20/SE20/PEL20 carrier Type KS05-W/R-8 080.244
Motor cable 8m EDM2x/ES20/SE20/PEL20 carrier Type KS05-Y/R-8 080.687
Motor cable 8m EDM2x/ES20/SE20 Type K05-D/R-8 080.236
Motor cable 8m EDM2x/ES20/SE20 Type K05-W/R-8 080.313
Motor cable 8m EDM2x/ES20/SE20 Type K05-Y/R-8 080.683
9.5 Repair and overhaul
Afag offers a reliable repair service. Defective modules can be sent to Afag for
warranty repair within the warranty period.
After expiry of the warranty period, the customer may replace or repair defective
modules or wear parts himself or send them to the Afag repair service.
Please note that Afag does not assume any warranty for modules that have
not been replaced or repaired by Afag!
CAUTION
Risk of injuries due to uncontrolled parts movements!
Risk of injury when removing the rotational axis due to uncontrolled
movements of the modules!

Only remove the module when the control unit is switched off and secured!

Only connect or disconnect the cables when the control unit is switched off!