Maintenance and repair
46 – 56
Assembly instructions EN
SE20 - SE30
Date 06.09.2021
Version 2.0
9.3.1 Overview of the maintenance points
Fig. 13
Maintenance rotational axis (exemplary SE30)
No. Maintenance point Maintenance work
Interval
System
[On/Off] Remarks
1
Rotational axis
Cleaning and
checking
As required
[Off]
-
Clean the rotational axis with a dry, lint-free cloth.
- Do not spray the rotational axis with water, do not use
aggressive cleaning agents.
- Perform a visual inspection of the axis.
Check screws for tight fit.
2
Total rotational axis
check
As required
[On]
- Acoustic check for unusual noise development (in case of
unusual displacement movements or hard knocks,
eliminate malfunction immediately).
3
Lubrication points
Lubricating
Every year
[Off]
Lubrication: If necessary, press in grease (Klübersynth UH1
14-31) via the fluid connections using a grease gun.
9.3.2 Lubrication
NOTICE
Risk of damage due to improper lubricants!
Do not use lubricants with additives such as MoS
2
, graphite or PTFE. These
lubricants can damage the module!
Only use the lubricants recommended by Afag in the maintenance table
chapter 9.3.1 or equivalent lubricants!
Fluid
Summary of Contents for SE20
Page 53: ...Assembly instructions EN SE20 SE30 Date 06 09 2021 Version 2 0 53 56 ...
Page 54: ...54 56 Assembly instructions EN SE20 SE30 Date 06 09 2021 Version 2 0 ...
Page 55: ...Assembly instructions EN SE20 SE30 Date 06 09 2021 Version 2 0 55 56 ...
Page 56: ...56 56 Assembly instructions EN SE20 SE30 Date 06 09 2021 Version 2 0 ...