Afag SE20, Assembly And Operating Instructions Manual

Page: 47 / 56

Maintenance and repair
Assembly instructions EN

SE20 - SE30

Date 06.09.2021

Version 2.0 47–56
9.3.3 Further maintenance
Further maintenance is not required, if the ambient conditions listed below are
complied with:

Clean working area

No use of splash water

No abrasion or process dusts

Environmental conditions as specified in the technical data
9.4 Spare parts lists
9.4.1 Servo controller
Designation Article no.
Controller E1250-EC for EtherCAT 080.243
Controller E1250-PL for PowerLink 080.239
Controller C1250-SE-XC-1S For Sercos over EtherCAT 080.409
Controller C1250-SC-XC-1S for Sercos III 080.417
Controller C1250-PN-XC-1S for Profinet 080.415
Controller C1250-PL-XC-1S for PowerLink 080.413
Controller C1250-PD-XC-1S for Profidrivet 080.763
Controller C1250-LU-XC-1S for LinUDP 080.741
Controller C1250-IP-XC-1S for Ethernet IP 080.411
Controller C1250-EC-XC-1S for EtherCat 080.405
Controller C1200-GP-XC-1S for General Purpose 080.407
Controller C1150-SE-XC-1S For Sercos over EtherCAT 080.768
Controller C1150-PN-XC-1S for Profinet 080.429
Controller C1150-EC-XC-1S for EtherCat 080.434
Controller C1100-GP-XC-1S for CANopen 080.432
9.4.2 Encoder
Designation Article no.
Connection cable 10m for E11x0 12-pin M12x1 - SubD 9pin 520.754
Connection cable 10m for B1100/C1xx0/E12x0 12-pin M12x1 - SubD 15pin 520.755