Afag CS 16/30, Manual, Page: 17 / 49

16 CS 16 - CS 20 - OI-vers. 5.3 gb. 20190312
3.1.4 Scope of supply
Quant. Description Quant. Description
2 Centering bushings 7x3 mm 2 Centering bushings 9x4 mm
4 Special screw M4x20/8 4 Special screw M6x25/9
3.1.5 Intended use
The series of the CS Compact Slide is used for the linear movement of rigidly mounted loads under the ambient
and operating conditions defined for this module; see Technical catalogue.
NOTE
These montage Instructions should be read carefully before carrying out any activity on or
with the module.
The module may only be deployed in accordance with the intended use.
Modifications on the module that are not described in these Montage Instructions or
have not been approved in writing by Afag are not permitted. In case of
improper changes or assembly, installation, operation, maintenance or
repairs, Afag rejects all liability.
CAUTION
Connection of compressed air and operation of pneumatic systems may cause
unpredictable movements which may result in personal injury or damage to property.
When connecting compressed air for the first time make sure that all air throttles are closed. Aerate the system
slowly.