Zeus Hand van Aether Biomedical, distributeur Loth Fabenim B.V.
EN
Zeus Hand Configurator - Web Application Instructions
17
Choose Grips Tab
9
Sequential mode
In the sequential mode you can cycle between the grips in the loop. Using the
Change Signal (CS) you go forward in the loop; using the Secondary Change Signal
(SCS), you go back. The grips are split into two groups: with the thumb opposed
and non-opposed. To switch between the groups, you need to manually adjust the
thumb position and a Change Signal or a Secondary Change Signal.
The order and number of grips of each of the groups can be modified after selecting
“sequential mode” in the Settings Area.
In sequential mode there can be a maximum of 5 grips in each of the groups defined
by the thumb position. This number can be decreased by unchecking the last grip
in the group - the unused grip will be grayed out. You can re-activate the grip by
checking the box over it.