Aesculap Favorita II, Instructions For Use Manual

Page: 9 / 124

7
5.2 Control, care and inspection
¾
Allow the product to cool down to room tempera-
ture.
¾
Inspect the product after each cleaning and disin-
fecting cycle to be sure it is: clean, functional, and
undamaged.
¾
Lubricate the shearing head as appropriate, see
section Lubricating the shearing head.
¾
To enhance the cutting power, adjust the plate
pressure as required, see section Adjusting the
plate pressure.
¾
Check the product for any damage, abnormal run-
ning noise, overheating or excessive vibration.
¾
Inspect the shearing head for broken, damaged or
blunt cutting edges.
¾
Set aside the product if it is damaged.
6. Maintenance
To ensure reliable operation, Aesculap recommends
servicing the product at least once a year.
Service addresses
Albert Kerbl GmbH
Felizenzell 9
84428 Buchbach / Germany
Phone:
+49 (0) 8086 933-100
Fax: +49 (0) 8086 933-500
E-Mail: info@kerbl.com
www.kerbl.com
Other service addresses can be obtained from the
address indicated above.