Aesculap Favorita II, Instructions For Use Manual

Page: 10 / 124

Aesculap Suhl GmbH
Shearing machine Favorita II, Favorita Speed, Electra® II, Ehmann turbo-line®
8
7. Troubleshooting list
Issue Detection Cause Remedy
Shearing head not mov-
ing Shearing head jammed Shearing head not prop-
erly engaged in its seat-
ing Properly engage the shear-
ing head, see section
Attaching the Blade
Rocker arm defective Replace rocker arm
Device cutting poorly or
not at all Device not cutting Cutting edges of shearing
head blunted Have product repaired by
the manufacturer
Animal hair too wet Only cut dry animal hair
Shearing head lacking
shearing pressure Have product repaired by
the manufacturer
Cutting performance
insufficient Cutting edges of shearing
head not honed correctly Have product repaired by
the manufacturer
Strong heat-up of shear-
ing head Lack of lubrication of
shearing head edges Lubricate cutting edges of
shearing head, see section
Lubricating the shearing
head
Shearing head jammed Animal hear jammed in
shearing head Demount shearing head and
remove animal hair
Device motor not run-
ning Device not cutting Debris on electric con-
tacts Switch off device and clean
the contacts
Motor/Electronics defec-
tive Have product repaired by
the manufacturer
Smell of burning from
the machine housing Motor burnt Have product repaired by
the manufacturer
Shearing head jammed Debris in shearing head Clean and lubricate the
shearing head, see section
Lubricating the shearing
head
Device motor running
very slowly Atypical motor noises Lack of lubrication of
shearing head edges Lubricate cutting edges of
shearing head, see section
Lubricating the shearing
head