Aesculap Favorita II, Instructions For Use Manual

Page: 8 / 124

Aesculap Suhl GmbH
Shearing machine Favorita II, Favorita Speed, Electra® II, Ehmann turbo-line®
6
4.3.4 Lubricating the shearing head
¾
Disassemble the shearing head, see section Disas-
semble the shearing head.
¾
Clean upper cutting plate 17 and lower cutting
plate 18 with a soft wipe or brush. Make certain
the gaps in serration 16 are cleaned properly.
¾
Slightly lubricate upper cutting plate 17 and lower
cutting plate 18 with special lubricant for shearing
heads GT604.
5. Reprocessing
5.1 Cleaning/disinfection
Note
Always follow disposal and hygiene instructions and
regulations!
Cleaning/disinfection
¾
Wipe the shell of the product with a lint-free cloth
moistened with a commercial disinfectant for wipe
disinfection.
¾
If necessary, after the appropriate exposure time,
wipe off any residues of the cleaning/disinfecting
agent with a lint-free cloth moistened with clean
water.
¾
Dry the product with a clean, lint-free cloth.
¾
Clean the contacts in the charging bay with isopro-
panol or ethyl alcohol and a cotton swab. Do not
use corrosive chemicals.
¾
If necessary, repeat the cleaning/disinfecting pro-
cess.
Cleaning the air filter
Note
The air filter must be cleaned once a week or whenever
necessary!
¾
Slide back and remove air filter 7 .
¾
Blow through or wash air filter 7 .
¾
Slide dry air filter 7 into its seating.
CAUTION
Damage to, or destruction of the
product caused by mechanical
cleaning/disinfecting or steriliza-
tion!
¾
Only clean and disinfect the
product manually.
¾
Do not sterilize the product
under any circumstances.
DANGER
Risk of electric shock and fire haz-
ard!
¾
Unplug the device before clean-
ing.
¾
Ensure that no fluids will pene-
trate the product.
¾
Leave the product exposed to
air for at least 1 minute after
cleaning/disinfecting.
CAUTION
Damage to the product due to
incorrect cleaning or inappropriate
cleaning/disinfecting agents!
¾
Use any commercial detergent
for surface cleaning.
¾
Never immerse the product in
water or detergent.
¾
Do not introduce any fluid into
the charging bays.
¾
Clean the contacts in the charg-
ing bays, applying extreme care.