Aesculap Favorita II, Instructions For Use Manual

Page: 6 / 124

Aesculap Suhl GmbH
Shearing machine Favorita II, Favorita Speed, Electra® II, Ehmann turbo-line®
4
2.2 Components required for operation
• Shearing machine Favorita II, Favorita Speed, Elec-
tra® II, Ehmann turbo-line®
• Shearing head
2.3 Intended use
Note
The device is intended exclusively for cutting animal
hair.
The shearing machine Favorita II, Favorita Speed, Elec-
tra® II, Ehmann turbo-line® is used for shearing small
animals.
The device is used with a shearing head to be selected
according to the respective application.
2.4 Operating principle
The device is switched on (off) by pushing the ON/OFF
switch up (down).
3. Preparation and setup
Non-compliance with these rules will result in com-
plete exclusion of liability on the part of Aesculap.
¾
Always observe the following guidelines when set-
ting up and operating the product:
– national regulations for installation and opera-
tion,
– national regulations on fire and explosion protec-
tion.
– operating advisories according to IEC-/VDE regu-
lations.
DANGER
Fire and explosion hazard!
¾
Do not operate the product in
explosion-hazard areas.
CAUTION
Malfunction of, or damage to the
product caused by improper setup!
¾
Do not expose the product to
direct sunlight or moisture.
¾
Do not cover the ventilation
slots of the product.
¾
Connect the product to the
specified voltage of 100 V to
240 V/50 Hz to 60 Hz.
¾
Ensure that the mains power
socket used for supplying the
product is freely accessible.