AES SOLAR Subscriber
24
AES P/N 40-3100S Rev. 3, 3/14/2023
7.3
BUZZER
–
ONBOARD SUBSCRIBER
Not applicable to Solar subscriber. The buzzer control enables or silences the onboard subscriber buzzer. The default
setting is
Enabled
.
1.
To disable, click the
Enable
control so that it changes to
Disabled
.
2.
When through, click the
Save Change
button.
7.4
UPLOADING/DOWNLOADING SETTINGS
Download Current Settings
Setting information can be downloaded from the subscriber. Select the
RF Config
or
IntelliPro Config
button and click
the
Download
button.
Upload Preconfigured Settings
To upload subscriber settings to the Model 3100S, click
Choose
File
, select the file, and click
Upload
.
Reset to Default Configuration
Subscriber and
IntelliPro
settings can be set to factory defaults.
1.
Set the
Subscriber Config
and/or
IntelliPro Config
switch to
Yes
.
2.
Click the
Reset
Configuration
button.
Note:
Reset with
Subscriber Config
does not change
the existing Subscriber ID and Cipher code
programmed in the unit.
7.5
SYSTEM FIRMWARE UPDATE
Updating
To update the subscriber software, click
Choose File
, select the upgrade file, and click
Update
.
Download Support Files (from subscriber to PC)
To download system information files, select the file type from the
Select file type
dropdown box, then click
Download
.
Restart System
Clicking the
Restart
button causes the Subscriber to halt communication and any system software that may be running.
The system software restarts and the Subscriber resumes communication.
8.
Flexible Power Option
Subscriber power can be provided by several different types of power sources. This control configures the type of
power source and the features associated with the power source. From the
Configuration
tab, select the
Flexible Power
Option
panel.