AES SOLAR Subscriber
21
AES P/N 40-3100S Rev. 3, 3/14/2023
6.14
SUBSCRIBER STATUS CHECK
General
Information about the Model 3100S subscriber is shown from the
Status
tab.
The
Status
page shows any faults, as well as the unit (subscriber) RF ID, Link Layer, and NetCon values:
If faults are present, they are displayed.
Routing Table
The subscriber routing table is shown in the
Routes
panel, as shown in the example below. Up to eight routes may be
shown:
Hardware
Information about the subscriber type, serial number, alarm panel type, and IP addresses are shown in the
Hardware
panel.
•
Model Type
– The Model 3100S, a Security subscriber, displays as type
Burg
.
•
Serial Number
– A unique serial number is assigned to each Model 3100S subscriber at the factory.
•
Zone Bank
•
Panel Interface
– The panel interface type detected during configuration is shown.
•
WiFi IPv4
– The address to an optional plug-in Wi-Fi adapter for wireless communications with the subscriber
during configuration.
The following are applicable only with IP access
:
•
Wired MAC
– The Media Access Control (MAC) address (which is the physical address) is a unique network
identifier assigned to the Model 3100S subscriber.
•
Wired IPv4
–
The IP address of the subscriber.