AES SOLAR Subscriber
14
AES P/N 40-3100S Rev. 3, 3/14/2023
Saving Configuration Changes
Saving configuration changes requires the following steps:
1.
When you are finished making changes, select and click
Save Changes
.
The
Saved new settings!
acknowledgement appears:
2.
You may finish and save your changes immediately, or you can make additional changes and then save all
changes at once afterward.
3.
If done making changes, click the
Update
tab shown in the browser (highlighted in red in the figure below):
The
Status
window displays changes:
6.4
VIEW SOLAR SUBSCRIBER SOFTWARE VERSION
The SOLAR software version is visible in the
System
tab under the
System Firmware Upgrade
panel.
Select the
System
tab, as shown in the following figure:
The version number is displayed in the
System
Firmware Upgrade
section:
6.5
SUBSCRIBER CONFIGURATION
Subscriber ID
Subscriber ID is set in the
Configuration
tab.
1.
From the main menu, select the
Configuration
tab.