12
1. Go over all seams and color overlaps with your
sealing iron.
Note:
Even if your models covering has no wrin-
kles out of the box it is still very important to go
over all seams and overlaps to make certain they are
sealed securely. This is especially important at the
leading edges of the wings and stabs. We recom-
mend checking the covering after each flying ses-
sion.
CHECKING SEAMS AND COLOR OVERLAPS FOR GOOD SEAL
2. Use your covering iron to ensure all edges,
seams, and color overlaps are securely sealed.
IMPORTANT
:
It is the purchaser / user responsibility to
check the covering seams and overlaps for se-
curity and a good seal. Aeroworks is not re-
sponsible for failure of covering seams or over-
laps during flight.
This is a never ending process that must
be done after each flying secession. Due to
varying temperatures and humidity changes
from day to day the covering will continue to
loosen and must be maintained.
3. Use your covering iron to ensure all edges are
securely sealed. Do not use a heat gun in this
area as it will cause the covering to pull away
from the cut out area.
