22
3. Secure the mounting bolts with the provided
8-32 lock nuts. Make sure to place the flat
washers onto the bolts before the lock nuts.
4. Install the axle onto the landing gear through the
pre-drilled mounting hole.
5. Align the flat sides of the axle bolt vertical and
snug the lock nut against the landing gear strut.
Note:
Do not tighten securely yet.
6. Align the wheel pant slot over the axle bolt as
shown. Slide the wheel pant slot over the flat
sides of the axle bolt and align blind nuts in
wheel pants with mounting holes in landing
gear.
7. Tighten the lock nut against the landing gear
strut to secure axle.
Align axle bolt with
front of gear
