9
Hardware
:
ITEMS NEEDED TO COMPLETE .46-.60 ProX260
•
.46-.60 Glow engine (OS 55AX Recommended)
•
Standard Muffler
•
2 1/4” Spinner
•
2 x aileron servos (min 65 in./oz. Torque @ 4.8
volts)
•
1 x rudder servo (min 65 in./oz. Torque @ 4.8
volts)
•
1 x elevator servo (min 65 in./oz. Torque @ 4.8
volts)
•
1 x throttle - mini servo (Hitec HS 65-MG Rec-
ommended )
•
Servo extensions 1 x 6” 2 x 12”
•
1 x 6 channel receiver/Radio
•
1 x receiver battery (min 4.8 volt / 1100mah)
•
1 x switch with charge jack
Tools
:
•
Allen wrenches US and Metric.
•
Dremel cutting disc and sanding drum tool
•
Electric drill and selection of bits
•
Razor saw
•
Flat head screwdriver
•
Hobby heat gun
•
Hobby iron and covering sock
•
Masking tape
•
Modeling knife
•
Needle nose pliers or crimping tool
•
Paper towels
•
Pen, pencil or felt tipped marker
•
Phillips screwdriver
•
Rubbing alcohol
•
Ruler and tape measure
•
Scissors
•
T pins
•
Waxed paper
•
Wire Cutters
Adhesives
:
•
15-30 Minute epoxy
•
Blue Loctite
•
Epoxy mixing cups, mixing sticks, brushes
•
CA kicker (optional)
•
Thick, Thin and Medium CA
•
Rubbing alcohol
•
Wipes
WARNING
Some rubbing alcohols
may attack painted parts.
