29. Remove the belly pan and scuff the edges where
it contacts the bottom of the wing with a small
piece of medium sandpaper. Clean the edges
with alcohol to allow good CA glue adhesion.
30. Use a small piece of medium sand paper to scuff
the surface of the covering material just inside
the line where the edges of the belly pan will
contact the bottom of the wing. Clean the area
with alcohol to give a good CA glue bond.
31. Align the belly pan on the wing along the pencil
lines and tack glue in place at each corner with
thin CA.
32. Press the edges of the belly pan to contact the
bottom of the wing and glue in place with thin
CA glue. Do not use excess glue to avoid runs
and drips of glue on the wing and belly pan.
16
The wing assembly is now complete.
