RADIO INSTALLATION
28
1. Route the motor power cables through the left
side hole in the fuse former.
2. Route the speed control motor leads under the
servo tray and connect to the motor power cables
as directed in the speed control instructions.
Carefully slide the speed controller under the
battery tray and mount with double-sided foam
tape.
3. We chose to mount the speed control arming
switch inside to the forward right side of the
servo tray. The switch is armed after plugging
in the battery and before the canopy is latched in
place. Mark and drill the switch mounting hole
with a 1/16 bit.
4. Mount the switch with a servo screw. (The
switch may also be mounted to the side of the
fuse for outside access if desired.)
