13. Before installing the servo, install both aileron
pushrods into the nylon aileron control horns as
shown.
14. Next, insert both aileron pushrods into the easy
links and then slide the aileron servo into the
aileron servo mount.
15. Mount the aileron servo using servo mounting
screws
16. Tape the trailing edge of each aileron to the
trailing edge of the wing. Rotate the aileron
servo output arm parallel to the trailing edge of
the wing. Then carefully tighten the easy link set
screw against the wire pushrod on each side to
ensure the ailerons are centered when the servo
arm is at the centered position. Remove the tape
12
