36
5. Remove the 4 Phillips head screws holding the
top hatch to the motor box.
6. Using mounting bolts and flat fender washers
mount engine to firewall. Tighten the bolts
evenly to prevent crushing of the firewall.
7. Engine installation is now complete.
Throttle Servo Installation
1. Gather the plywood four side throttle servo
mounting tray, the throttle servo and pushrod
parts.
1 x 4-40 metal rod threaded at one end
2 x 4-40 ball links and hardware
2 x Brass spacers
1 x 4-40 threaded solder couplers
2 x Flat washer
6 5/8”
