12
Aileron Servo Installation
1. Gather the aileron servos, servo mounting
screws, (4) 6” Servo extension, (4) 1 1/4” Servo
arms and (4)
Aeroworks Safety Clips
as shown
below.
Note:
The ailerons have been pre-hinged and glued
to the wing panels and are ready for flight. No
other steps are necessary for hinging.
WING ASSEMBLY
2.
Layout the servo and extension on the wing to
test fit the installation and ensure servo lead is
the correct length.
Note:
180 in. oz. digital, metal geared servos are
recommended. Servo selection can be the
difference between a great flying model and
a model that will crash. Always use brand
name high quality servos.
3.
Attach the 6” extension to the servo lead and
secure with an
Aeroworks safety clip
. Ensure
the plugs will not come apart from vibration or
light tension.
4. Remove the balsa stick with the pull string from
the servo well and tie the pull string to the servo
lead as shown.
Note:
Secure with tape so that the string pulls from
the front end of the plug
. Taper the tape to
avoid hang-ups inside the wing.
