78
1. Decals supplied with the kit may vary from the
photos below. Installation step are the same
Gather supplied decals, transfer tape, ruler, scis-
sors, hobby knife, plastic squeegee or credit
card, Windex or Application fluid like
Rapid
Tac
. Also, a solution of 1 drop of dish detergent
to a cup of water sprayed on the model will as-
sist in proper positioning.
Note:
Clean surface and tighten all covering before
any decals are applied.
2. Cut transfer tape to accommodate decal size.
Note:
Transfer tape will be reused. DO NOT throw
away any transfer tape until decal
placement is complete.
3. Remove backing from Clear transfer tape.
4. Apply clear transfer tape over top of decal.
