5
KIT CONTENTS
50cc Pitts Python ARF-QB
Materials List
Basic Aircraft Parts
Fuselage
– covered, firewall installed and fuel-proofed:
(2) 1/4” blind nuts installed for the bottom wing
mounting
(8) 6-32 blind nuts installed for the inner cabane
mounting
(4) 4-40 blind nuts installed for the cowling
mounting
(1) L=850mm Antenna Tube installed
(2) L=70mm Pull-Pull cable exist tubes installed
(1) Pilot holes pre-drilled for tail wheel assembly
(1) Top hatch cover for the engine box with AW
logo installed by (4) T2.6x8mm PWA screws
(1) Hatch cover for the landing gear installed by
(2) T2.6x12mm PWA screws
(1) Tinted Canopy installed on the fuse by (11)
T2.6x8mm PWA screws
Top Wing
with Aileron – pre-glued at factory, covered:
(8) 6-32 blind nuts installed for the Outer and Inner
struts
mounting.
(14) pin point hinges glued
(2)Aileron servo string installed
(2) Pilot holes pre drilled for control horns mounting
Bottom Wing
with Aileron and belly pan– pre-glued at
factory,
covered:
(4) 6-32 blind nuts installed for the Outer struts
mounting.
(14) pin point hinges glued
(2) Aileron servo string installed
(2) Pilot holes pre drilled for control horns mounting
Horizontal Stabilizer
with elevator assembly with (10)
pin point hinges (not glued)---covered
(2) Pilot holes pre drilled for control horns mounting
