11
Aileron Servo Installation
1. Gather the aileron servos, pushrods, control
horns, mounting screws and 4-40 ball links as
shown below.
Note:
The ailerons have been pre-hinged and glued
to the wing panels and are ready for flight. No
other steps are necessary for hinging.
Note:
We have supplied clear covering for sealing
the hinge gaps. This is an optional step but is
recommended
WING ASSEMBLY
2.
Layout the servo and extension on the wing to
test fit the installation and ensure servo lead is
the correct length.
Note:
180 in. oz. digital, metal geared servos are
recommended. Servo selection can be the difference
between a great flying model and a model that will
crash. Always use brand name high quality servos.
3.
Attach the 6” extension to the servo lead and
secure with safety wire, string, tape, or other
method. Ensure the plugs will not come apart
from vibration or light tension.
4.
Fasten the pull string from the servo hole to
the male plug of the servo extension.
