Aerotech Ndrive HPe 10, Hardware Manual

Page: 73 / 126

Installation and Configuration Ndrive HPe 10/20/30
2.6.5. High-Speed User Inputs 12-13 (J205)
The high-speed inputs 12-13 are typically used as a sample signal for data collection.
Table 2-36: High-Speed Input Specifications
Specification Value
Input Voltage 5V or 24 V input voltages based on a jumper setting ( Table 2-38 )
Input Current 10 mA
Input Device HCPL-0630
Delay 50 nsec
Table 2-37: High Speed Digital Input Connector Pins on the Auxiliary I/O Connector (J205)
Pin# Description In/Out/Bi
3 High-Speed Input 12 + user interrupt Input
4 High-Speed Input 12 - user interrupt Input
5 High-Speed Input 13 + user interrupt Input
6 High-Speed Input 13 - user interrupt Input
Table 2-38: Input Voltage Jumper Configuration
Jumper Setting Description
JP3
1-2
(1)
24 V operation (High Speed Input 13)
2-3 5 V operation (High Speed Input 13)
JP4 1-2
(1)
24 V operation (High Speed Input 12)
2-3 5 V operation(High Speed Input 12)
(1) Default
Figure 2-38: High-Speed User Inputs (J205)
www.aerotech.com Chapter 2 73