Insert rudder in rudder sleeve. Make sure to include
washer 19 when you do this!
Protect hull along keel´s gluing surface then glue keel
6 to hull using Stabilit Express. Secure with tapping
screws 9 and washers 10.
When glue has cured secure rudder with screw 20.
First enlarge hole in keel to accept screw head, then
glue screw in place in keel with epoxy.
Note:
Control horn 21 can be installed at a later
stage, when the model is fitted with radio control
equipment. Use this picutre as a guide and secure
control horn with nut 22.1 and lock nut 22.2.
On the inside of the hull carefully roughen the surface
of the anchor pocket with a small sanding block, then
glue parts 208 in place with Stabilit Express.
Note:
Parts 208 will make it easier to glue in place
the anchors later on and will prevent water from
entering the hull along the anchor shank.
12
13
10
10
20
208
20
19
19
22.1
21
22.2
10
9
