Glue mooring ports 37 into bulwark. From the inside glue parts 39
onto neck of mooring ports.
Remove wash ports 38 from set of photo etched parts and glue to
the outside of bulwark.
35
37
38
39
From below drill hawser holes for anchors 40 with 2.5 mm
at a steep angle. Shorten shank by ca. 20 mm and use a file
to adapt opening until anchor fits anchor pocket properly.
Note:
Glue anchors in
place when hull is
completely painted.
Drill from below at
a steep angle with
2.5 mm.
36
20 mm
