Superstructure
Glue together floor, front and rear wall (48, 49 and 50) of wheelhouse in one go, then glue assembly to
left side wall 46. Tabs and notches in individual parts make sure that parts are aligned correctly.
Remove any excess glue from inside of wheelhouse. Leave to dry for a few minutes.
Note:
Left side wall 46 is identified by two openings for portholes!
Turn assembly upside down, glue in place parts 51, 52, 53, 54 as shown and secure
with clamps and/or tape.
Note:
Top edge of parts 53 and 54 is below top
edge of side panels!
Place assembly upside down on building board, glue side
panel 47 in place, put suitable weight on wheelhouse floor
and let dry.
1
3
2
46
47
54
53
52
51
49
48
50
