Assemble nav light boards from parts 96, 97, 98. Make sure to
assemble a left and a right nav light board!
Position nav light boards on superstructure above doors. When
position of nav light boards is determined, drill holes through roof of
superstructure for nav light leads in case you want to install working
lights.
Glue together nav lights from parts 99, 100, 101.
Note:
Navigation light lenses will accomodate LEDs with a
diameter of 3 mm.
Assemble parts 99, 100, 101, 102 to form the lamp housings.
Note:
Photo etched part 102 is used to limit the beam angle of the
lamp. Bend part 102 around lense, then glue in place.
Supports 103 A/B are specific for different diameters of mast and
mast extension.
Slide supports to respective positions on mast and mast extension
and glue in place. Positions of supports above superstructure are:
Ÿ
70 mm
Ÿ
104 mm
Ÿ
140 mm
Parts 104 can be added to supports for optical reasons. Glue lamps
to supports after you have decided for or against the installation of
LEDs.
Glue mast extension into mast.
22
23
96
97
104
102
103 A/B
98
99
100
101
