MAINTENANCE MANUAL
AMT 200S
SECTION:1
MM - 200-25
9
Elevator Trim Control System
9.1
Basic components of the Trim Control System:
1-
Trim control wheel assembly
2-
Trim tab wheel indicator
3-
Cartridge spring
4-
Elevator control rod
5-
Cable assembly support
6-
Cable
9.2
Rigging
9.2.1 Verify the elevator travel (up and down) and adjust as necessary. See item 6.
9.2.2 Install tool n° 55400-A-28F1 at the horizontal stabilizer to lock the elevator in the neutral
position.
9.2.3 Check if the indicator of trim control at the horizontal console is in the neutral
position. Remove the console and adjust the indicator position at its fitting.
9.2.4 Remove tool n° 55400-A-28F1 at the horizontal stabilizer and verify the elevator trim
travel of indicator; full forward - nose up, full rearward - nose down, adjust limiting stops
if necessary.
9.2.5 Verify the cable tension (25 lb ± 2 lb); adjust cable tension on turnbuckcle as
necessary; make sure that bolts are correctly tightened.
Page 1.28
August 10, 2004 - Rev. 8
Summary of Contents for AMT 200S SUPER XIMANGO S
