Aeroneb
®
Solo System Instruction Manual
7
7. Use the universal mounting bracket to attach the controller to an IV pole or bed
rail in either a vertical or horizontal orientation (Figure 3).
8. Where a standard equipment mount is available, use the equipment mount
adapter to support the controller (Figure 3).
Figure 3.
Aeroneb Pro-X Controller and universal mounting bracket configurations
Warnings
•
To ensure uninterrupted operation of the Aeroneb Solo, secure both the AC/DC
adapter cable and the controller cable so they cannot become disconnected
during treatment. If clips are available on patient circuits, run the cables through
the eyes of the clips. If clips are not available, ensure that all cables are routed
safely.
•
The AC/DC adapter is the means of isolating the Aeroneb Solo system from the
mains power supply.
•
The continuous mode can only be operated from AC power supply.
•
Do not over-tighten knob on the universal mounting bracket.
Vertical
Universal Mounting Bracket
Horizontal
Universal Mounting Bracket
Equipment
Mount Adapter
Standard
Equipment Mount
