Aeroneb
®
Solo System Instruction Manual
25
Specifications
Table 4.
Physical Specification of the Aeroneb Solo System
Nebulizer Dimensions
67 mm H x 48 mm W x 25 mm D
2.6” H x 1.88” W x 1.1” D
Aeroneb Pro-X Controller Dimensions
33mm H x 75mm W x 131mm D
1.3” H x 2.9” W x 5.2”D
Controller Cable Length
1.8 m (5.9 ft.)
AC/DC Adapter Cable Length
2.1 m (6.7 ft.)
Nebulizer Weight
13.5 g (0.5 oz) nebulizer and plug
Aeroneb Pro-X Controller Weight
230 g (8.1 oz.), including battery and cable
Nebulizer Capacity
Maximum 6 mL
Table 5.
Environmental Specifications of the Aeroneb Solo System
Operating
Maintains specified performance at circuit pressures up to 90 cm H
2
O and
temperatures from 5 °C (41°F) up to 45 °C (113°F).
Atmospheric Pressure
450 to 1100 mbars
Humidity
15% to 95% relative humidity
Noise Level
< 35 dB measured at 0.3 m distance
Storage &
Transport
Transient Temperature Range
-20 to +60°C (-4 to +140°F)
Atmospheric Pressure
450 to 1100 mbars
Humidity
15 to 95% relative humidity
Table 6.
Power Specifications of the Aeroneb Solo System
Power Source
FRIWO (AG-AP1040-US) AC/DC adapter (input 100 to 240 VAC 50 – 60
Hz, output 9 V) or internal rechargeable battery (4.8 V nominal output).
Note:
The Aeroneb Pro-X controller is approved for use with Aerogen AC/
DC adapter AG-AP1040-US (Manufacturer Reference: FRIWO FW7660/09)
Power Consumption
< 8 Watts (charging), 2.0 Watts (nebulizing).
Patient Isolation
Controller circuitry provides 4 kilovolt (kV) patient isolation and complies
with IEC/EN 60601-1.
