AERO-LIFT FORCE-LIFT, Instruction Manual

Page: 9 / 51

LIST OF CONTENS
FORCE-LIFT
®
9/51
Operator obligations and liability
•
These original operating instructions, in particular the safety instructions, must be observed
by all persons who work with the machine.
•
The laws, regulations and rules on occupational safety, accident prevention, fire prevention
and environmental protection which apply for the place of use must be observed (e.g., in
Germany: BGR500)!
•
Constructive or functional changes to the machine are only permitted with the
manufacturer’s written approval.
•
Unless contractually agreed otherwise, spare parts and wearing parts and recommended
accessories may only be obtained from the manufacturer.
•
The machine may only be used as intended.
•
The machine must be in a sound state of repair.
•
The machine must undergo regular inspections and maintenance in accordance with these
operating instructions.
•
The machine may only be transported, set up and stored by qualified specialists.
•
There must be enough space around the machine for the operating personnel to ensure that
the machine may be operated without any obstructions.
•
Persons may NOT stay in the transport area.
•
The machine may only be used and checked by adequately qualified personnel. The
personnel must fulfill the following conditions:
•
The personnel must have sufficient technical knowledge for safe and professional handling
of the machine as a result of their professional training, work experience and up-to-date
professional activities.
•
The personnel have been instructed and briefed in the operation.
•
The entrusted personnel must have read and understood the operating instructions.
•
Personnel must comply with their duty to supervise during operation.
•
Personnel must be at least 18 years old
•
The machine must be secured against any unauthorized use if it is not used for a long
period of time.
•
Only AL technicians and experienced system technicians may be employed for installation,
assembly and start-up.
•
Work on the pneumatic system and vacuum equipment may only be carried out by a
specialist.
•
Cleaning may only be carried out by trained personnel. Upon completion of cleaning
activities, all lines are to be checked for leaks, loosened connections, chafe marks and signs
of damage! Promptly remedy any identified deficiencies.
•
Maintenance and repair activities may only be carried out by qualified personnel.
•
Maintenance of the electrical equipment may only be carried out by a qualified electrician.
•
Warranty and liability claims for personal injuries and property damage are excluded when
one or more of the aforementioned requirements have been disregarded.